Rack power safety

OscarVelour

OscarVelour

New member
Hello all! I have another question about my rack...

Got it all working pretty nicely but don't like having all my gear powered separately so I bought a rack mount power supply. I had a couple of prerequisites which made it difficult to find one that suited me but I found a Samson powerstrip ps10 which fits the bill. (As an aside, why do so many rack power strips have their sockets on the face of the unit instead of the back? I don't want all the wires having to come out the back of my rack to plug into the front on my power supply?). The only problem is all my rack gear has standard UK plugs and this power supply has female IEC C14 sockets.

My idea is to buy a few of the wireable connectors from the link below, cut off the standard uk plugs and wire them up to these.

www.netbit.biz

IEC C14 Male Plug Re-Wirable Inline Connector - 10A @ 230V

Heavy Duty Re-Wirable IEC C14 Male Plug High Quality, completely re-wirable IEC-C14 (Kettle type) male inline plug assembly for all your electrical power applications. Ideal for connecting to the most common, industry-standard power, IT and related powered hardware including Power Distribution...
www.netbit.biz www.netbit.biz

The thing I want to pick some people's brains about is whether this is safe? My Samson powerstrip has a 10amp push to reset fuse built in, will this be enough? I'm aware that getting rid of the UK plugs will get rid of the fuses that are inside them and I want to make sure I'm not damaging my gear or creating a fire hazard!

Any help would be much appreciated!
 
Perfectly safe Oscar so long as you do the job right! Make sure for instance that there is a low, <1 Ohm, resistance from the main 13A plug to every bit of kit that needs an earth.

Ten amps is 2.3kW and it is very unlikely that the power draw of all your kit comes close to that. In fact I would bet you could put a 5A fuse in the plug* and never have it blow? Certainly 10A never will. Think of the old "Hi Fi separates" rigs of yesteryear? Amp, turntable, OR deck, cassette deck. Nobody had enough 13A sockets! They used diss strips or indeed connector systems very akin to what you propose. I did very similar yonks ago.

*In fact if you still have a slight worry you could do that.

Dave.
 
Its recommended to use a vibrational feeder..with music gear..

Cannot beat Furmans power conditioer with voltage regulation. It maintains 120 volts or whatever you set, with a built in automatic variac. In one rack space nonetheless..

Screenshot 2024-04-04 162810.jpg
 
Whilst I am sure that Furman unit is first class, for that money you might as well buy a continuous conversion UPS? That will give you a stable mains supply with the added benefit of around 20 minutes 'backing up time' should the mains fail.

Dave.
 
That's crazy money, and as virtually all modern gear is happy from the US 110 or so to the UK 240 or so, it's pointless. Why would anyone need such stabilisation nowadays? I love the advert "the problems caused by AC line voltage irregularities" - er, what problems?
 
You need a power meter to see the changes..Then the variac or vibrational feeder increases or decreases the current.

Expensive but worth it. Im still using my Staco variacs to feed the equipment and a Furman conditioner. Done.

Rack units state specifically the current they are rated for. 110,117,120, etc. Best give it what they deserve.

At my old house with the AC on it would only get 108-110 at the wall. And would show accordingly on the meter.
TheRig.jpg
I can dial it right back up to 125+ with the Staco variac.
staco.jpg

That Furman I linked has a built in variac, for that price its a steal ...and only 1 rack space..Amazing.
 
Last edited:
whats a CAE 3+ go for $4000?
whats a ADA mP-1 or 2 $1000's
whast a EL 100/100 ? $1000's

shits expensive. do it right

.........then use the grainiest shitiest digital reverb you can...16 bit or 8 bit..
 
rob aylestone said:
That's crazy money, and as virtually all modern gear is happy from the US 110 or so to the UK 240 or so, it's pointless. Why would anyone need such stabilisation nowadays? I love the advert "the problems caused by AC line voltage irregularities" - er, what problems?
Click to expand...
Not usually one to agree on tech opinions from our laser endowed Arab royalty but in the world of recording, affordable is very relative. Pointless? I shipped recording rigs all over the world and South America and Eastern Europe had some pretty sketch power. We used similar units back in the day in our portable racks. The costs associated with producing a classical recording made the equipment cost seem like pennies. Not saying this is what the OP needs but depending on the level you are working, it is not unusual.

To Dave's point, a really good pure sine wave inverter running either in a UPS or just batteries otherwise will ensure no noise issues from power. When Bob Ludwig moved his family to Portland Maine and built Gateway Mastering Studios, he spared little expense. Due to some work contacts, I was able to spend time with his engineering team and had an extensive technical tour of his facility. Power for the studio consisted of a large room full of batteries and inverters. Batteries charged off hours. Studio ran on 100% battery power. This is a guy that has done work for just about every major label and artist.

Now is this what is needed for the average home studio? Here is probably where I diverge from Mr coherent light source and would say no, but some thought to good clean power should be a consideration. Rob, I've seen in a couple of posts where you've indicated some noise issues. Perhaps better planning and routing? I built my studio and ensured I have at least a clean feed of power direct from the panel. I paid close attention to lights used, power routing and grounds. Everything feeds into EMI and RFI filtering and if I put a O-scope on the AC, nothing but a clean sine wave. Overkill? I see a new post where someone is having noise issues in a basement studio.

Of course, none of this addresses the OP's question. I figured if we are all diverging off the topic, then why not.
 
You must log in or register to reply here.
Back
Top